Multiple Choice Identify the choice that
best completes the statement or answers the question.
|
|
1.
|
____________ buy approximately
75% to 80% of the chain saws sold each year.
a. | Loggers | b. | Farmers | c. | Homeowners | d. | Landscapers |
|
|
2.
|
Approximately _____ million
chain saws are sold annually in the United States.
|
|
3.
|
Knowing the parts is important
for______ of the chain saw.
a. | safe
operation | c. | proper
repair | b. | proper maintenance | d. | all of these are correct |
|
|
4.
|
When starting a chain saw, you
should_______.
a. | place the chain saw on the
ground | c. | hold the chain saw on your left
leg | b. | hold the chain saw on your right leg | d. | hold the chain saw on a tree |
|
|
5.
|
The_______ is the most
commonly injured part of the chain saw operator’s body.
a. | left leg from knee to
toes | c. | left arm, wrist, and
fingers | b. | right leg from knee to toes | d. | right arm, wrist, and fingers |
|
|
6.
|
__________ is/are a piece of
safety equipment capable of withstanding the shock of a chain saw hit.
a. | Ear
protectors | d. | Chaps | b. | Safety glasses | e. | all of these are correct | c. | A hard hat |
|
|
7.
|
The________ is not an external
part of most chain saws.
a. | muffler | c. | fuel tank cap | b. | ignition switch | d. | air cleaner |
|
|
8.
|
Gullet, tang, and depth gauge
are all parts of the________.
a. | guide
bar | c. | chain | b. | rear handle | d. | front handle bar |
|
|
9.
|
Most chain saws have_________
engines.
a. | 2 cycle | c. | diesel | b. | 4 cycle | d. | external combustion |
|
|
10.
|
When cutting a log, an
__________ is performed by placing the guide bar on top of the log and cutting
downward.
a. | undercut | b. | underbuck | c. | overcut | d. | overbuck |
|
|
11.
|
The width of the slice created
as the wood chips are removed by the chain, is called the_______.
a. | slice
width | b. | kerf | c. | divit | d. | drift |
|
|
12.
|
When cutting a log where only
one end is supported, the first cut should be an underbuck approximately ______ of the way through
the log.
a. | 1/4 | b. | 1/3 | c. | 1/2 | d. | 2/3 | e. | 3/4 |
|
|
13.
|
If a log is supported on both
ends and a cut is to be made between both supports, the first cut should be
an_________.
a. | undercut | b. | underbuck | c. | overbuck | d. | overcut |
|
|
14.
|
The jumping of a chain saw from
the cut toward the operator is called_________.
a. | jumpback | b. | kickback | c. | jumpup | d. | kickup |
|